Elastomeric Coating

A white coating consisting of a polymeric binder and ultraviolet and infrared reflective pigments and otheradditives to help provide protection of roof membranes for longer roof cycles and to provide reflectivity of solar radiation to help reduce energy consumption by lowering air conditioning costs.

The Roof System to RESTORE instead of Repair or Replace the Roof.

Use on roof surfaces: Mod. Bit., smooth BUR, PVC, Wood, Metal and Concrete (read specs first).

Tam-Star Elastomeric Coating – White This premium-quality white elastomeric coating is ideal for coating over asphalt and metal roofing, including galvanized aged at least 6 months and prepainted metal roofing. Its highly elastic qualities help ensure years of performance even under the most harsh conditions. It provides a weather-resistant shield over the surface, reflects harmful ultraviolet and infrared radiation, and withstands thermally induced stresses. Its highly reflective surface helps reduce surface temperatures and cooling costs. 1 gal. & 5 gal. BUR & Mod. Bit. – 2 gals./sq.   Metal – 1.25 gals./sq. Brush, Roll or Spray 7-year Limited Warranty
Tam-Guard Elastomeric Coating This quality white coating is ideal for coating over asphalt rolled roofing and metal roofing (including galvanized aged at least 6 months and pre-painted metal) such as grain silos and ambient-temperature storage tanks. It can also be used over mobile homes, truck trailers and school bus tops. It provides a weather-resistant shield over the surfaces and reflects harmful ultraviolet and infrared waves.It prolongs the life of the roofing system and its highly reflective surface helps reduce surface temperatures and cooling costs. 5 gal. BUR & Mod. Bit. – 2 gals./sq.   Metal – 1.25 gals./sq. Brush, Roll or Spray 5-year Limited Warranty
Tam-Star Patching Cement – White This premium-quality white elastomeric cement, when used in conjunction with white resin-coated fiberglass reinforcing fabric, is ideal for sealing seams in metal roofs and for repairing flashings and sealing around vent pipes and skylights prior to the application of reflective surface coatings. Its carefully prepared blend of acrylic polymers and adhesion promoters helps ensure successful adhesion over a variety of surfaces. Use with Mesh Roof Fabric to seal seams on metal roofs, repairing flashings & sealing around pipes and skylights 3.5 gal. & 1 gal. 1 gal./12-15 sq. ft. Brush or Trowel 7-year Limited Warranty
Tam-Star Acrylic Primer – White This premium-quality translucent acrylic primer is ideal for coating over APP and SBS-modified bitumen membranes and metal (including galvanized aged at least 6 months and painted metal). Its carefully prepared blend of acrylic copolymers and stain-blocking pigments helps ensure successful adhesion over a variety of surfaces. Its carefully prepared blend of acrylic copolymers and stain-blocking pigments helps ensure successful adhesion over a variety of surfaces. 5 gal. BUR & Mod. Bit. – 0.5-1 gal./sq.   Metal – 0.25 – .50 gal./sq. Roll, Broom or Spray 7-year Limited Warranty
Tam-Star Mesh Roof Fabric – White This premium resin-coated fiberglass mesh fabric reinforces repairs to metal roofing seams, flashings, and around vent pipes and skylights. Its 20 x 10 weave pattern helps ensure superior wetting of the adhesive and adds increased tensile strength to demanding repairs. The fiberglass backbone helps provide durability and resistance to deterioration caused by mold, algae, and weathering. Resin coated fiberglass mesh fabric reinforces repairs Use with Tam-Star Patching Cement 4” x 100’ roll 7-year Limited Warranty

TOPCOAT® Elastomeric Membrane – White

A water-based, spray-applied liquid, which cures to form a seamless 100% acrylic elastomeric membrane specially designed to seal the entire roof. TOPCOAT® is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. TOPCOAT® is listed by the Cool Roof Rating CouncilSM for solar reflectance and thermal emittance. It offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy. Ultraviolet rays enhance curing. It is low in VOC, non-flammable and presents minimal hazard to the applicator and the environment. It is available in white (for maximum reflectivity) and 15 standard colors. Custom tinting is available upon request.

• 1 gal., 5 gal. & 55 gal. drum
• Metal, Wood, Copper, PVC & Concrete – 1- 3 gals./sq. (varies by system)
• Brush, Roll or Spray
• Do not install below temp. of 42° F – substrate temp. below 120° F
• Limited Material Warranty for up to 10 Years
• Guarantees available for up to 20 Years

TOPCOAT® MB Plus

A water-based, low VOC, acrylic, sprayable polymeric liquid, which cures to form a seamless rubber membrane. Covers and protects most roof surfaces including modified bitumen (smooth and granulated), smooth BUR, and metal. MB Plus is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. MB Plus is listed by the Cool Roof Rating CouncilSM for solar reflectance and thermal emittance. It is highly reflective, flexible and, due to unique emulsion chemistry, resists unsightly bleed-through over asphalt substrates better than solvent-based systems. Available in white (for maximum reflectivity) and custom colors. It is non- flammable, presents minimal hazard to the applicator or the environment, and cleans up with water.

• 5 gal. & 55 gal. drum
• Smooth BUR, Mod. Bit. (Smooth & Granulated), Hypalon, Wood, Concrete & Metal  & (Metal as a primer) – 1- 3 gals./sq. (varies by system)
• Brush, Roll or Spray
• Do not install below temp. of 42° F – substrate temp. below 120° F
• Limited Material Warranty for up to 10 Years
• Guarantees available for up to 20 Years

MP-300 RUST INHIBITING PRIMER Light Blue

A light blue, acrylic water-based, industrial primer/rust inhibitor that must be applied to any areas of rust before TOPCOAT® Flashing Grade or TOPCOAT® Elastomeric Roofing Membrane can be applied. Heavy, flaking rust and scale must be removed by scraping, wire brushing, or grit blasting, followed by power washing with water. MP-300 can be used to brush-treat small scattered areas of rust, or it can be sprayed over areas of widespread rust. It is non-flammable, VOC compliant, and cleans up with water.

• 5 gal. & 55 gal. drum
• Pressure wash then apply to rusted areas before applying TOPCOAT® Flashing Grade or Elastomeric Membrane – 1 gal./sq.
• Brush or Spray
• Limited Material Warranty for up to 10 Years
• Guarantees available for up to 20 Years

LIQUID FLASHING FABRIC GRADE 5 Gal.

A light gray, water-based, acrylic flexible liquid fabric seam sealer that does not require reinforcing fabric on properly fastened horizontal seams of metal roofs – reduces horizontal seam labor up to 50%. This product can be used to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric when horizontal seams are properly secured as per product application specifications.

a light gray, water-based, acrylic flexible liquid fabric seam sealer that does not require reinforcing fabric on properly fastened horizontal seams of metal roofs – reduces horizontal seam labor up to 50%. This product can be used to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric when horizontal seams are properly secured as per product application specifications.

• 5 gal.
• Use to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric
• Brush or Spray

TOPCOAT® FASTENER GRADE

A light gray, water-based 100% acrylic synthetic elastomeric sealant with unique flow properties designed to encapsulate exposed metal roof fasteners. It offers all of the advantages of TOPCOAT® Flashing Grade, including high UV resistance and water clean-up. In addition, its unique flow properties allow for easy application to exposed metal roof fasteners with no tooling. Fastener Grade is available in 1-qt. tubes for easy dispensing and application.

• 1 Qt. Cartridge – approx. 275 fasteners/cartridge
• Use to encapsulate exposed metal roof fasteners also sealing around curbs and counter flashings
• Flexible will expand & contract with metal roof

TOPCOAT® TOPESTER FABRIC 6” X 150’

A non-woven, 100% fully spun-bonded polyester web that can be used in all sorts of roofing installations and repairs. TOPESTER Fabric must be used in conjunction with TOPCOAT® Flashing Grade, SB-900, and FlexSeal at all penetrations, joints or other areas that are subjected to high shear or stress.

• Widths – 4”, 6”, 12” & 36” all by 150’
• Polyester woven fabric to be used with TOPCOAT Flashing Grade, SB-900 & Flexseal at all penetrations joints or other areas subject to high shear & stress

TOPCOAT® EPDM COATING

A water-based, reflective, highly flexible, liquid-applied membrane designed to protect and provide reflectivity to EPDM and other single ply roofs. EPDM Coating is listed by the Cool Roof Rating CouncilSM for solar reflectance and thermal emittance. It is designed to be used after the roof has been treated with our proprietary EPDM cleaner. The EPDM System provides an alternative to high solvent products and can be used on both fully adhered and mechanically attached EPDM systems.

• 5 gal. & 55 gal. drum – Coverage 1 gal./sq.
• Use to resurface EPDM membrane roofs
• Roll or Spray
• Must use with TOPCOAT® EPDM CLEANER 1 gal. – coverage 1 gal./500 sq. ft. – drying time 30 minutes

A light gray, water-based, acrylic flexible liquid fabric seam sealer that does not require reinforcing fabric on properly fastened horizontal seams of metal roofs – reduces horizontal seam labor up to 50%. This product can be used to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric when horizontal seams are properly secured as per product application specifications.