Imagine visiting a website, entering an address of a home, and the next day getting an accurate materials estimate for that roof. Imagine the savings in time . . . and safety!

In less than 24 hours, Lionguard generates an accurate and professional estimate report for any home or commercial building. The report is customized with your and ready to present to your customer. For Arrowhead customers, no credit card is required. We will bill you. You can also earn points against free measurements.

Click through the presentation below to see how it works. . .

Click the link below to register for free
and start entering jobs immediately.

Already Signed Up > LOGIN HERE

“Residential construction.” Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.

Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.

Ice & Water Protection

_______________________

Moisture Guard Plus – Tamko

• Use Moisture Guard Plus and TAMKO shingles together over the entire deck with proper ventilation for maximum roofing protection
• Extra roofing protection for vulnerable areas. Use on valleys, eaves, flashings, hips, ridges, rakes, and around dormers and skylights
• Self-adhesive backing seals to the deck. SBS-modified asphalt coating helps seal around nails for a watertight finish
• Split-plastic release film eases installation and handling
• Can be used in new construction or in reroofing requiring a complete tear-off
• Helps extend the life of your roof
• Fiberglass mat is stronger and provides better tear resistance than saturated felt
• Easy to install
• Nonskid surface for better traction and safer application
• Provides extra protection under most types of roofing including tile, wood shake, asphalt, slate or composite shingles. Not recommended for use under metal roofing. Use TAMKO TW Metal and Tile Underlayment or TW Underlayment under metal roofing applications.

TW Underlayment – Tamko

• Rubberized asphalt
• Textured polymer surface provides enhanced skid resistance
• Self-adhesive and treated release film for easier installation
• High temperature resistance up to 245° F
• Can be left exposed for up to 90 days before application of finished roof
• Roll size is 200 square feet. (39-3/8″ x 61′)

TW Metal and Tile Underlayment – Tamko

• Textured surface provides skid resistance
• Strong fiberglass reinforcement for added stability during installation
• Split treated release film for easier installation
• High temperature resistance up to 250° F
• Meets ASTM D 1970 for nail sealability of self-adhering roofing underlayments
• Can be left exposed for up to 90 days before application of finished roof

Weather Watch – GAF

• Protect your home by preventing costly repairs due to wall or ceiling staining
• Help prevent leaks due to water damming in your gutters, wind-driven rain, and, in the North, damaging ice dams
• Self-seals around nails or metal roofing fasteners
• Specially coated surface with added tack for extra traction under foot
• Dual side selvage and split back release film speed installation for greater homeowner value
• 2.0 square roll size
• Can be left exposed for up to 60 days if necessary
• Weather Watch® leak barriers are excellent vapor retarders exceeding ASTM D1970 requirements with a .05* vapor permeance (*Based on internal testing)

StormShield

• Helps prevent water leakage due to ice dams and wind-driven rain
• Improved flexibility for superior performance
• Slip-resistant surface for safe application
• Tear-resistant membrane
• Glass fiber reinforced for extra strength
• Self-adhesive for watertight sealing
• Self-sealing around roofing nails
• Meets most building code requirements

WeatherLock – Owens Corning

• Self adheres to plywood
• 40% lighter weight than similar granulated products
• Mat surface for slip resistance
• ASTM D 1970 approval
• used on areas of the roof where water has a tendency to collect or flow

LionGuard – Carlisle

• Protects the roof structure from water seepage caused by ice dams and wind-driven rains.
• LionGuard membranes seal around roofi ng nails, staples and screws.
• Used to ensure the watertightness of the primary roofi ng system in critical areas.
• LionGuard membranes bond directly to the roof substrate for fast and easy installation without the need for additional adhesives.
• Features a split-release fi lm for easier and faster installation.
• Features a unique granular skid-resistant
• surface for safe and easy installation.
• Will not crack, dry out or rot and provides long-term waterproofi ng performance.
• Concealed waterproofing system that will not detract from the architectural aesthetics of the primary roofing system.

Synthetic Underlayments

Tamko Synthetic Underlayment

• Light grey polymeric surface provides a cooler working surface than traditional felt
• Skid resistant and tear resistant
• Lightweight product with more coverage per roll than traditional felt underlayments
• Lay lines and cap-nail locations printed on the underlayment for ease of install—also includes high-wind cap-nail locations
• 25-year Limited Warranty

Sharkskin Comp

• 100% polypropylene-based
• 6-month UV exposure tested
• Thermally stable with an average melting point of 320 degrees F
• Wind and tear resistant reinforced roof underlayment used on steep pitched roof applications under asphalt composition shinges
• Matt white color, which keeps the building cool inside and out and easy to handle in extreme heat
• Convenient printed shingle lay lines to assure straight-line roofing

Sharkskin Ultra

• 100% polypropylene-based
• 12-month UV exposure tested
• Thermally stable
• High tensile strength reinforced
• Self-adhered/peel and stick ice and water membrane roof underlayment used in steep slopes applications with tile, metal, real, and synthetic slate and aslphalt composition singles
• Matt grey/white color, which keeps the building cool inside

Atlas Summit Synthetic

• High tear strength
• 6-month min. UV resistance
• Inorganic construction
• Assumes shingle warranty
• High coefficient of friction
• High tear strength
• Printed lay-up lines
• High burst strength
• 10 sq. roll size
• < 30 lbs. per roll
• High temperature rating
• Available at all Atlas plants
• Safer to walk on, holds fasteners
• Maintains integrity of performance
• Does not absorb water
• Warranty matches Atlas shingle term
• Good walking traction
• Resists high wind blow-offs
• Easy alignment on roof
• Resists fastener pull through
• More coverage, less labor
• Easier and safer to handle
• Good to 300º F
• Available 1 pallet at a time

GAF Deck-Armor

• At least 600% (i.e., 7 times) greater tear strength than standard #30 felt!
• Helps prevent inside moisture from becoming trapped within your roofing system — and causing mold, mildew, and expensive structural damage
• Exceptionally durable, non-asphaltic construction will not rot or become brittle (unlike conventional asphalt felts which can disintegrate over time)
• Backed by a 25-year ltd. warranty against manufacturing defects
• Unlike conventional asphalt felts, resists wrinkling or buckling, so it lets your shingles lay flatter for a better-looking roof
• Can withstand UV degradation for 180 days when left exposed

	T430M 1” x 30’ Tape Non magnetic Strip		CT430 1” x 30’ Tape Magnetic Strip
	MW10 Measuring Wheel 10” Dia. Wheel 3’ Circumference Net. Wt. – 2.10 lbs.		TP12 2 Bag Tool Pouch
	TP67 Nail & Tool Bag		Rubber Gloves Generic
	Knee Pads – Tan AJC Tools		CG10 Utility Caulk Gun
	CG20 Professional Caulk Gun		30” Magnetic Sweep AJC Tools
	Long Handle Shingle Remover – Red Ripper		D Handle Shingle Remover – Red Ripper
	AV3 Aviation Snip Cuts Straight, Left & Right		AV2 Aviation Snip Cuts Right
	AV1 Aviation Snip Cuts Left		M14N Andy Snip Cuts Straight, Mild Curves & Layers M14NRB Replacement Blades
	MC14N Andy Snip Left & Right Circles to 6” Dia. and Straight MC14NRB Replacement Blades		M9 Regular Pattern Straight Cuts & Wide Curves
	CR18 Hand Riveter		2-in 1 Hand Riveter Long Stroke & Short Ratchet
	BAK Break Away Knife		9PK Quick Open Knife Hook Blades Available
	A. 001-ASG27M Roofing Hatchet Head Weight 19 oz.  B. 002-SG100 Roofing Hatchet – Best Selling Hatchet – Head Weight 18 oz. C. 001-ASG27S Measures Standard Exposures. Head Weight 17 oz. D. 000-LS22 Roofing Hatchet Head Weight 12 oz. E. 003-WSG Wood Shingling Hatchet		TS1 – Turbo Shear – To cut metal. Insert into any chuck of any 1200 RPM A/C or Cordless drill. Drill is now a power shear. Cuts up to 20 ga. Steel. TSDC – Drill Clamp Option for one Hand use
	DEFT Hemming Tool for standing seam metal roofing		S2, S6 & S9 Modles Hand Seamers – 2”, 6” & 9”
	SRT1 SideSwiper Siding Removal Tool		SL5 Snap Lock Punch 3/8” Throat Depth
	NHP1 Nail Slot Hole Punch		TNP2S Trim Nail Punch
	GOT – Gutter Outlet Punch GOP23UK – 2”x3” punch & die accessory GOP34UK – 3”x4” punch & die accessory		C4 Downspout Crimper
	GND Gutter Nail Driver

http://malcoproducts.com

Royal Group, Inc. is a leading North American manufacturer and marketer of vinyl-based home improvement, building and construction products. Royal Group, Inc.’s main campus is located in Toronto, Ontario and the business has approximately 3,000 employees in locations throughout the United States and Canada.

Siding

	Royal Crest – .040 – all 2 sq/ctn Profiles: D4 & D4DL  (12 pcs/sq) D5 & D5DL  (10 pcs/sq) D4 Vertical  (15 pcs/sq) S8  (12 pcs/sq)
	Residential – .042 – all 2 sq/ctn Profiles: D4  (12 pcs/sq) D4.5  (11 pcs/sq) T3  (11 pcs/sq) D4.5DL  (11 pcs/sq)
	Journeymen – .044 – all 2 sq/ctn Profiles: D4  (12 pcs/sq) D4.5  (11 pcs/sq) S6.5  (15 pcs/sq) D4.5DL  (11 pcs/sq)
	Royal Woodland – .046 –.046 – 16’ 4” Profiles: all 2 sq/ctn except S7 B&B is 1 sq/ctn D4.5  (8 pcs/sq) D4.5DL  (8 pcs/sq) S7 Board & Batten  (17 pcs/sq)
	Journeymen – .044 – all 2 sq/ctn Profile:  S7”  (14 pcs/sq) – 1 sq/ctn Fitted with Pactiv GreenGuard® Ribbed Foam Pactiv GreenGuard® foam is an energy star product 3.86 System R-Value Maximum impact resistance Fits into standard j-channels and windows with integral J
	Royal Ridgeback .046 Profile: S7” (14 pcs/sq) – 1 sq/ctn Rigid backer protects against condensation, rot, mold and mildew Will not warp, buckle or sag Maximum impact resistance 250 mph wind rating

Accessories & Soffits

Starter Strip – steel, vinyl or aluminum

	J- Channel 10’ – 3/4” or 1 ¼” pocket   40/ctn
	Finish Trim (UT) 10’ – 20/ctn
	Dual Undersill Trim 10’ – 20/ctn
	Inside Corner Post 10’ – 3/4”  5/ctn
	Outside Corner Post 10’ – 3/4””  10/ctn
	Designer Outside Corner Post 20’ – 1”  5/ctn
	Fluted Outside Corner Post 10’ – 5/ctn

Soffits

	T4 Solid .040 – 16/ctn T4 Fully Vented basket weave – 16/ctn 8.2 sq. in. net free area per sq. ft. T4 Center Vent basket weave – 16/ctn (white only) 2.7 sq. in. net free area per sq. ft.
	T3 Solid .044 – 20/ctn T3 Hidden Vent .044 – 20/ctn 1.77 sq. in. net free area per sq. ft.
	T2 Beaded Solid 12/ctn T2 Beaded Hidden Vent 12/ctn 3.0 sq. in. net free area per sq. ft.

Standard Colors

ColorScapes Premium Colors

ColorScapes Dark Colors

***Colors may not be an exact match to the actual product

Siding

	American Dream Edge – .040 PROFILES:   all 2 sq/ctn D4 & D4DL  (12 pcs/sq)      D5DL  (10 pcs/sq)
	Parkview – .042 PROFILES:   all 2 sq/ctn D4 & D4DL  (12 pcs/sq)      D5 & D5DL  (10 pcs/sq)
	Market Square Profiles:   all 2 sq/ctn D4  (12 pcs/sq)       D4.5DL  (11 pcs/sq) D5  (10 pcs/sq)
	Premium Pointe 360 Profiles:   all 2 sq/ctn D4.5  (11 pcs/sq)       D4.5DL  (11 pcs/sq)
	Oracle – Solid Core Profile:  all 2 sq/ctn Q4  (6 pcs/sq) & Q4.5       DL  (5.5 pcs/sq)
	Craneboard Solid Core Profile:  T6 & D7 – 2 sq/ctn   –   D10 – 1 sq/ctn T6  (5.5 pcs/sq) & D7  (7 pcs/sq)          D10 Board & Batten  (6 pcs/sq)

Accessories & Soffits

Starter Strip – steel, vinyl or aluminum

	J- Channel 12’ 6” – 3/4” or 1 1/8” pocket   48/ctn
	Finish Trim (UT) 12’ 6” – 48/ctn
	Dual Undersill Trim 12’ 6” – 36/ctn
	Inside Corner Post 10’ – 3/4”  16/ctn
	3 ¼” Outside Corner Post 10’ – 3/4” 10/ctn
	5 ½” Outside Corner Post 20’ – ¾” 5/ctn & 1 1/8”  4/ctn
Soffits	T4 Solid .040 – 16/ctn – 15 colors T4 Fully Vented perforated – 16/ctn – 15 colors T4 Center Vent perforated – 16/ctn (white, musket brown, country beige & clay)
	Premium Pointe T3 Solid .044 – 20/ctn Premium Pointe T3 Hidden Vent .046 – 20/ctn
	T2 Beaded Solid 12/ctnT2 Beaded Hidden Vent 12/ctn 3.0 sq. in. net free area per sq. ft.

Standard Colors

Premium Colors

Central States Manufacturing, Inc. manufactures and delivers high quality metal building components to post frame, commercial, and residential customers in the central portion of the United States.

Metal Panels – Roof

Residential

	Panel-Loc™ Panel-Loc™ is a low rib (5/8”) panel that is best used for post frame barns and buildings, as well as residential roofing. Panel Loc™ is available in 26 and 29 gauge steel.
	Panel-Loc Plus ™ Panel-Loc Plus™ is a low rib (3/4”) panel which provides durable performance with an added striation on top of the rib that gives it even more strength. Panel-Loc Plus™ gives agricultural and light commercial projects, as well as residential roofs, the protection of steel with an attractive appearance.
	Horizon-Loc™ Horizon-Loc™ is a durable concealed fastener roof system with easy snap together installation. This architectural panel system uses minimal visible fasteners, giving your building a clean, attractive finish. The panel’s easy snap-on ribs attach rapidly with no hand seaming, so installation is less expensive than traditional standing seam.

Commercial

	R-Loc™ This 26 gauge commercial panel is an excellent choice for projects that require commercial grade performance. R-Loc™ is designed to maximize the potential of your structures, specifically the steel frame. R-Loc™ has an added purlin bearing rib, so you can count on easier installation and a more pleasing appearance.
	M-Loc™ M-Loc™ is a structural roof and wall panel that can be installed directly over purlins or joists. The M-Loc™ panel is available in 26 gauge. This commercial panel has long served customers with lasting durability in commercial type applications.
	Precision-Loc™ Precision-Loc™ is our 26 gauge commercial/industrial wall and soffit panel. Precision-Loc™ is available with one rib (perforated or solid), two ribs (solid only), and solid flat (no ribs).
	Central-Loc™ Central-Loc™ is a snap-together architectural roofing system that is an excellent choice for commercial applications. Central-Loc™ is manufactured from Galvalume which offers two to four times the corrosion resistance of galvanized steel. Central-Seam Plus™
	Central Seam Plus™ Central Seam Plus™ is a trapezoidal standing seam system designed for commercial and architectural projects. Central Seam Plus™ mechanically seamed system begins and ends in the high, reducing the risk of leakage at the rake.

Red Iron

Channels, Angle, Cees, Zees, Eave Struts, Hat Channel & Purlin Clips

The Importance of GALVALUME

Galvalume is a substrate of both zinc and aluminum providing 4 times the corrosion resistance of a galvanized panel.

Note: when asked if their panel is galvalume some will say, “It is galvanized.” Be sure to explain the difference. Galvanized is zinc only.

CentralGuard™ Colors

*meets Energy Star®requirements. Check product brochure for colors within various systems. Colors are representations and may vary from actual colors.

When Price is Important & a 10 year Warranty Will Do

Thrifty Panel-Loc™29 ga. And 26 ga. Available   –   9 colors10 year Integrity Warranty

Photo Gallery – Residential, Commercial, etc.

http://www.centralstatesmfg.com

Nearly 200 Dumpsters – making your job easier

• Convenient – we deliver & pick up when you say
• All shingles are recycled – no waste taken to landfill
• No more costly trips to the dump
• No more dump fees to pay
• No more hand unloading
• Save both time & money
• Oversize rubber tires to preserve driveways
• 55 square capacity – single layer 3 tabs
• Return full bundles by placing them on wheel well

We Do Recycling

Shingle Recycling Advantages:

• Divert the amount of material previously going to landfills
• Conservation of non-renewable resources (aggregate & asphalt cement materials)
• Structural improvements can be realized with little with little to no change in pavement thickness
• Crude oil conservation – with oil content of at least 20% in tear off shingles, if the amount of tear off shingles in Missouri were to reach at least 156,000 tons a year, approximately 32,000 tons, (64,000,000 lbs.), of virgin asphalt oil would be conserved each year by recycling asphalt shingles into Hot Mix Asphalt.

We Do Job Lockers

Job Locker Advantage

• Tamper Resistant – more secure
• Weather Resistant – material dry and clean
• Compact Design
• Professional appearing jobsite
• Tamper Resistant Door Latch – you supply lock
• Rubber Feet – easy on driveways
• Set on Job – no dragging on driveway
• E-channel Interior – secure materials
• Welded Steel Construction – magnetic signs will hold
• We Deliver & We Pick up when job is done
• Put returns inside – one less trip
• Low Cost – Call Us Now – Give it a Try
• For siding, decking, railing, windows, doors, rolls etc.

We Do Trash Bags

Heavy Duty Nylon Reinforced
1.5 yd. capacity

Job Trash Bags

• Low Cost way to manage the trash on your jobsite
• Clean jobsite every day
• If purchased with Job Locker, we pick up and dispose your trash
• If purchased separately, can be reused

Gutter, Accessories, Gutter Coil, & Gutter Guard

	K Gutter – 5” & 6” cut to the nearest inch
	End Caps – RH & LH – 5” & 6” 50/ctn
	Downspout 10’ .019 2” x 3”  &  3” x 4” – 10/ctn
	Drop Outlet – 2-3/4” x 2-3/8” – 30/ctn
	Rectangular Outlet – 3” x 4” – 30/ctn
	Inside Mitre – 5” & 6” – 20/ctn
	Outside Miter – 5” & 6” – 20/ctn
	Strip Inside Mitre – 5” – 20/ctn
	Strip Outside Mitre – 5” – 20/ctn
	Bay Inside Strip Mitre 45° – 20/ctn
	Bay Outside Strip Mitre 45° – 20/ctn
	A Elbow – 2” x 3”  &  3” x 4” – 20/ctn
	B Elbow – 2” x 3”  &  3” x 4” – 20/ctn
	Pipe Band – 100/ctn
	Hidden Hanger – 5”  &  6” – 500/ctn
	Zip Screws – #10 x 1-1/2” – 1000/box
	Zip Screws – 3/8” or 1/2” – 1000/box
	Gutter Caulk – Geocel 2300
	Touch Up Paint
	Gutter Coil – sold by the pound  5” gutter coil (.027) (11.75”w) – 2.5 lin. ft./lb. 6” gutter coli (0.32) (15”w) – 1.6 lin. ft./lb.int
	Trim Coil 24” x 50’ – .019 both PVC & Smooth
	Waterfall Gutter Guard 8’ – white & clay – 200’/box Waterfall End Caps – white & clay E-Z Lock Gutter Guard 4’ – 100/box E-Z Lock Step Down Gutter Guard 5” & 6” O.C. 5” RapidFlow™ 4’ – 128 lin. ft./bag