Suitable for all use in all types of single-ply systems; mechanically attached, fully adhered, and ballast applied.
GAF EverGuard ® TPO 45 mil
GAF EverGuard ® TPO 45 mil thermoplastic polyolefin single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard TPO 45 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Fully Adhered, and Ballast Applied.
Compared to typical single-ply EPDM and PVC membranes, GAF EverGuard TPO 45 mil roofing membrane provides the benefits of low installed cost, heat welded seams, white reflective color.*
GAF EverGuard ® TPO 60 mil
GAF EverGuard ® TPO 60 mil thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard TPO 60 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Fully Adhered, and Ballast Applied
Compared to other heavy-duty single-ply EPDM, PVC and TPO membranes, GAF EverGuard TPO 60 mil roofing membrane provides the benefits of all three materials in a single membrane: low installed cost, heat welded seams, white reflective color, and no liquid plasticizers.
Accessories
The GAF EverGuard® TPO single-ply roofing system includes an extensive line of EverGuard® TPO flashing accessories for use with EverGuard® TPO roofing systems. EverGuard® flashing accessories are heat welded to the EverGuard® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard® TPO flashing accessories are available in standard colors of white, gray and tan unless otherwise noted.
- Detailing membrane 24” x 50’
- Cover Strip 6” x 100’ (used at perimeter to get a 15 yr. warranty)
- Roof Transition Anchor Strip (RTA Strip) 6” x 100’
- Universal Pre-Formed Corners 4” x 4” w/6” flange
- T-Joint Patches
- Pipe Boot pre-formed – 1” – 6” clamp ring included
- Cleaner 1 gal. – 5,000 l.ft./gal.
- Primer 1 gal. – at seams & end laps 225 l. ft. 3” lap
- Primer 5 gal. – at seams & end laps 1,125 l. ft. 3” lap
- Bonding Adhesive (solvent base) 1 gal. – 50-60 sq. ft./gal 2 surface
- Bonding Adhesive (solvent base) 5 gal. 250-300 sq. ft./pail 2 surface
- Everguard Caulk 10.3 oz – 15 l. ft. coverage 3/8” bead (use at upper lip of termination bar & around upper edge of penetration clamping rings)
- Everguard Block Mastic 10.3 oz. – 10 l. ft. 3/8” bead (use between flashing membrane & substrate surface, behind termination barsand between roofing membrane and drain flanges)
- Everguard Cut Edge Sealant – pint (use to seal the edge of a cut membrane to seal it from the elements)
- Coated Metal 4” x 10’ ( use at perimeter to get a 20 year warranty)
- Scuppers TPO Coated (4” x 6” x 12” or 8” x 10” x 12”)
- Drains with TPO membrane (½” to 6” in ½” increments)
- Walkway Rolls 30” x 50’ gray only
- Pourable Sealer Pocket
- Pourable Sealer A & B – does 2 pitch pans 6”x6”x4” high
- Flexseal – can also be used w/fill as a pourable seal
 |
Leister Triac S 120 V – 120 volt, 1600 watts, °C 20-700
Adapter tube with heat protection, electronic heating element protection, motor shut off at minimal carbon level, multiple replacement of carbon brushes possible.
Leister Heating Element for Leister Triac S 120 V – type 33 120V and 1600W
Accessories
- Termination Bar 10’ – predrilled (requires 21 anchor pins)
- Anchor (masonry) pins 7/8” – sold by the box – 100/box
- Anchor (masonry) pins 1 ¼” – sold by the box – 100/box
- Anchor (masonry) pins 1 ½” – sold by the box – 100/box
- Anchor (masonry) pins 2” – sold by the box – 100/box
- 2” Barbed Plates Galv. – 1000/box
- 3” Ribbed Plates Galv. – 1000/box
- 1 5/8” Screws – 1000/bucket
- 2 ¼” Screws – 1000/bucket
- 2 7/8” Screws – 1000/bucket
- 3 ¼” Screws – 1000/bucket
- 3 ¾” Screws – 1000/bucket
- 4 ½” Screw – 1000/bucket
- 6” Screws – 1000/bucket
- 8” Screws – 1000/bucket
- Hercules Retro 2” Drain W/Aluminum Body
- Hercules Retro 3” Drain W/Aluminum Body
- Scupper Retro 2” Drain W/Aluminum Body
Insulation Boards – Recovery Boards
- High Density Wood Fiber 4’ x 8’
- 1” Polyisocyanurate 4’ x 8’
- 1 ½” Polyisocyanurate 4’ x 8’
- 2” Polyisocyanurate 4’ x 8’ (other thicknesses available)
- Tapered systems available for both ISO and EPS
- Securock® – thicknesses ¼”, ½” in 4’x8’
- Moisture & mold resistant
- Solid core provides exceptional bond strength – fiber-reinforced technology
- Saves on adhesive vs. glass fiber face products
- Excellent wind-uplift performance
- No glass fiber face to delaminate – no irritation when carrying
- Flame spread 5 - Smoke developed 0
- Use with single-ply, BUR, modified bitumen and fluid applied
- USG allows the bonding of cold mastic modified bitumen & torching directly to the surface
Pactiv Recovery Boards – for single ply membranes
- PB6W – for mechanically attached systems
- PB6FA – for fully adhered systems (compatible w/most adhesives)
OMG SpotShot Adhesive – for insulation
OMG Dispensing Hand Gun – for OMG SpotShot
Applicable Standards
UL Listed, FM Approved, Dade County Product Approval, Florida Building Code Approved, CRRC Listed, Title 24 Compliant, ENERGY STAR ® Listed, ASTM D6878.
| Physical Properties | ASTM Test Method | ASTM 6878 Minimum | EverGuard Typical TestData |
| 1. Certain data is provided in MD (machine direction) x CMD (cross machine direction) format.2. Data is based upon typical product performance, and is subject to normal manufacturing tolerance and variance | |||
| Nominal Thickness | ASTM D-751 | 0.039″ (min.) | 0.045″ |
| Breaking Strength | ASTM D-751 Grab Method | 220 lbf/in. | 290 lbf x 270 lbf |
| Factory Seam Strength | ASTM D-751 | 66 lbf | 100 lbf (membrane failure) |
| Elongation at Break | ASTM D-751 | 15% | 30% |
| Heat Aging | ASTM D-573 | 90% Retention of Breaking Strength and Elongationat Break | 100% |
| Tear Strength | ASTM D-751 8″ x 8″ Sample | 55 lbf | 124 lbf x 140 lbf |
| Puncture Resistance | FTM 101C Method 2031 | Not Established | 290 lbs. |
| Cold Brittleness | ASTM D-2137 | -40 C | -40 C |
| Permeance | ASTM E-96 | Not Established | 0.070 Perms |
| Dimensional Change | ASTM D-1204 @158 F, 6 hrs. | +/- 1% | 0.4% |
| Water Absorption | ASTM D-471 @158 F, 1 week | +/- 3.0% max. | 0.7% |
| Hydrostatic Resistance | ASTM D-751 Method D | Not Established | 390 psi |
| Ozone Resistance | ASTM D-1149 | No visible deterioration@ 7 x magnification | No visible deterioration@ 7 x magnification |
| Reflectivity (white) | ASTM C1549 | N/A | 0.76 |
| Emissivity (white) | ASTM C1371 | N/A | 0.90 |
Product Data
Roll Size
Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing packaging tolerance and variation.
Colors
Full Roll Size
Full Roll Weight
Half Roll Size
Half Roll Weight
White, Tan, Gray, Regal Red, Regal Blue Hartford Green
10’ x 100’(1,000 sq. ft.)
256 lbs.
5’ x 100’
128 lbs.
Note: Membrane rolls shipped horizontally on pallets.
Storage
Store rolls on their sides on pallets or shelving in a dry area.
Safety Warning
Membrane rolls are heavy. Position and install by at least two people.
Fastened – 5” lap, 958 sq. ft.
Adhered – 3” lap, 975 sq. ft.
Ballast – 3” lap, 975 sq. ft.
Roll Size
Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing packaging tolerance and variation.
Colors
Full Roll Size
Full Roll Weight
Half Roll Size
Half Roll Weight
White, Tan, Gray, Regal Red, Regal Blue Hartford Green
10’ x 100’(1,000 sq. ft.)
256 lbs.
5’ x 100’
128 lbs.
Note: Membrane rolls shipped horizontally on pallets.
Storage
Store rolls on their sides on pallets or shelving in a dry area.
Safety Warning
Membrane rolls are heavy. Position and install by at least two people.
Adhered – 3” lap, 975 sq. ft.
Ballast – 3” lap, 975 sq. ft.
