MODIFIED SBS ROOFING MOP & TORCH
AWAFLEX SBS Modified – Granule Surface (TAMKO)
- 155 g/m2 nonwoven polyester mat
- 125 mil thickness – 1 square/roll
- Easily applied by mopping in hot asphalt or modified adhesive
- Colors: White, Black, Cedar & Weatherwood
- 10 Year Material Limited Warranty
AWAPLAN 170 SBS Modified – Granule Surface (TAMKO)
- 180 g/m2 nonwoven polyester mat
- 145 mil thickness – 1 square/roll
- Easily applied by mopping in hot asphalt or modified adhesive
- Colors: White, Black, Cedar & Weatherwood
- 12 Year Material Limited Warranty
RUBEROID® MOP – Granule Surface (GAF)
- 140 mil Thickness – 1 square/roll – 32.56’ length X 39.625” width
- Easily applied by mopping in hot asphalt or modified adhesive
- Colors: White, Black, Slate Blend,Burnt Sienna Blend,Weathered Wood, & Cedar Blend
- 12-year Limited Material Warranty
RUBEROID® TORCH – Smooth (GAF)
- 165 mil thickness – 1 square roll – 32.6’ length X 39.625” width
- Torch down applied (Heat Weld Applied)
- Great for new roofs, reroof, repairs of BUR or other Mod.Bit. systems
- 12-Year Limited Material Warranty
GAFGLAS® #75 Base Sheet
- 3 sqs/roll
- Must use as a base sheet when applying torch down SBS Modified
- Also a premium base sheet to prevent asphalt bleed-through
- 12 Year Limited Material Warranty
MODIFIED SBS ROOFING SELF ADHERING
TAMKO SBS MODIFIED Cap Sheet – Self Adhering – Granule Surface
- 142 mil thickness – 1 square roll – 33’ 6 ¼” length X 39 3/8” width
- Lightweight, highly flexible dual-coated SBS modified cap sheet
- Use as roofing membrane & flashing membrane for low-sloped residential jobs
- Split release film – install in a temperature of 45° F and rising
- 15 Year Limited Material Warranty
- Colors: Glacier White, Rustic Black, Shadow Grey, Weathered Wood, Rustic Cedar & Buff
TAMKO SBS MODIFIED Base Sheet – Self Adhering
- 61 mil thickness – 2 square roll – 65’ 10” length X 39 3/8” width
- Flexible, fiberglass reinforced, rubberized asphalt sheet membrane with a polymer film on the surface and a removable treated split release film on the adhesive side
- Side lap 2” and End lap 4”
- Alternate method is nailing the base, see Tamko Application Requirements
- 15 Year Limited Material Warranty
LIBERTY™ CAP SBS Modified – Self Adhering – Granule Surface
- 157 mil thickness – 1 square roll – 34’ length X 39.375” width
- Apply on roofs with 1/2″ to 6/12 roof pitches
- End Laps 6” and Side Laps to selvage edge
- Roll with a min. 50 lb. weighted roller
- Apply Plastic cement where sheets extend over granules
- Install at temperatures between 45° F to 95° F
- Colors: White, Black, Weathered Wood, Hickory, Tan, Slate & Shakewood
LIBERTY™ Base/Ply Sheet SBS Modified – Self Adhering
- Must use as a base sheet before applying Liberty Cap Sheet
- 2 square roll – 66’ length X 39.375” width
- Lap side laps 3” and end laps by 6”
- Roll with a min. 50 lb. weighted roller
- Apply on minimum 15/32” plywood using Asphalt Primer at a rate of ½ – ¾ gal/sq. or apply to min. ½” ISO with an approved fiberglass or paper facer
- Must apply primer to edge metal if used
- Roll out and let relax 30 minutes before applying to minimize the potential for wrinkles
BUR (BUILT-UP ROOFING)
- Keg Steep Asphalt
- Asphalt Primer 1 gal.
- Asphalt Primer Spray Can
- #43 Base Sheet – 2 sq. roll
- GAFGLAS® Flashing – use as base flashing
- GAFGLAS® Ply 4 – use as base sheet, ply felt or flashing membrane
- Cant Strip – 25 pcs/bdl – 96 l.ft./bdl
- Cant Strip (perlite style)
- Gravel Guard – 3” x 3” x 10’’
- Roofing Torch (generic)
- 4” membrane
- 6” membrane
- 36” membrane
- 24 oz. cotton mop w/72” handle (cmop24)
- 40 oz. cotton mop w/72” handle (cmop40)
- 48 oz. cotton mop – head only (bpmh)
- Gloves
- Karnak Kleaner – hands & clothes
