OmniRidge OR-4 Shingle Over Ridge Vent – 4’ Section – 10/ctn
- Pre-formed to 3/12
- Adjusts 2/12 to 16/12
- 18” net free area per/lin. ft.
- No connectors required
- Internal & external baffles
- Weatherproof under-lapping join
- 10 supported nail holes
- Molded nail lines
- Alignment tabs
- Molded fanfold end plugs
OmniRoll OR-30 Shingle Over Ridge Vent – 30’ roll – 1/ctn
- Adjusts 2/12 to 16/12
- 18” net free area per/lin. ft.
- Exterior Convolute baffles
- design allows flexibility to roll up & out while maintaining it’s shape
- No filter to clog
- Can cut at 1’ intervals to minimize scrap
- Supported nail holes every foot will not crush
- Air flow acceleration design maximizes ventilation capacity
- Omni baffles mean air flow from any direction
Power Ventilator Lomancool 2000 – 1/ctn – Mill, White, Black, Brown & Bronze
- With or Without HUMIDISTAT
- Factory-set adjustable thermostat switches on at 100⁰ and off at 85⁰
- Thermostat features a push to test button
- Deep flange & rain shield keep water out
- Balanced fan blades for quiet operation
- 8”x8” aluminum screen for insect protection
- Settings: 80% minimum, 42%
- normal & 20% maximum
- Also adjustable to fit individual humidity levels in attic
- Made in USA motor
Whirlybird® Turbine Vents – BIB-14 – 1/ctn – Mill, White, Black, Brown & Bronze
- Hole size – 14”
- Base – 22”x22”
- Height – 20”
- Base included
- Internally braced
- Ball bearing design for quiet operation – permanently lubricated
- Vari-pitch base adjusts to 12/12 roof pitch
- 21 air-foil curved vanes with rolled vane edges to deflect water
- Tested to withstand winds of 110 mph
- Reduces energy bills and winter ice build up
