ICE & WATER PROTECTION
Moisture Guard Plus – Tamko – Self Adhering
- Use as an underlayment to prevent damage from ice damming and windblown rain – resistance up to 250° – 90 day exposure
- Non skid mineral surface for better traction and safer application
- Use on valleys, eaves, flashings, hips, ridges, rakes & around dormer & skylights as a flashing
- Not recommended for use under metal roofs
- 1 sq. roll, 1.5 sq. roll (best value) & 2 sq. roll – 55 mil – split release
TW UNDERLAYMENT – TAMKO – Self Adhering
- Use as an underlayment where prevention of water penetration is
required prior to the installation of a metal roof system or
mechanically fastened tile roof system - Rubberized asphalt membrane, fiberglass reinforced – 75 mils
- Skid resistant surface
- 2 sq. roll – temp. resistance up to 250° – 90 day exposure
Weather Watch® GAF – UNDERLAYMENT – Self Adhering
- Use for protection from wind driven rains & damaging Ice Dams
- Do not use on metal roof systems
- Mineral Surface for skid resistance – 60 day exposure
- 1.5 sq. and 2 sq. rolls available
StormShield IKO UNDERLAYMENT – Self Adhering
- Standard Ice & Water protector from wind driven rains & ice dams
- Modified bitumen membrane with a split release paper
- Sanded on it’s top to provide a nonslip surface – 55 mils
- 2 sq roll – release film on back
WeatherLock O.C. – ICE & WATER BARRIER – self sealing
- Protection from wind driven rains & ice dams
- Slip resistant granulated surface – modified bitumen membrane
- Split sheet peel away poly backer
- 1 sq and 2 sq rolls – 53 mil membrane
LIONGUARD Carlisle – UNDERLAYMENT – Self Adhering
- Water penetration protection by wind driven rains and ice dams
- Rubberized asphalt with a granular surface for skid resistance
- 1 sq and 2 sq rolls – 55 mil membrane – max. 30 day exposure
TOPCOAT® Elastomeric Membrane – White TCRM
- 1 gal., 5 gal. & 55 gal. drum
- Metal, Wood, Copper, PVC & Concrete – 1- 3 gals./sq. (varies by system)
- Brush, Roll or Spray
- Do not install below temp. of 42° F – substrate temp. below 120° F
- Limited Material Warranty for up to 10 Years
- Guarantees available for up to 20 Years
TOPCOAT® MB Plus
- 5 gal. & 55 gal. drum
- Smooth BUR, Mod. Bit. (Smooth & Granulated), Hypalon, Wood, Concrete & Metal & (Metal as a primer) – 1- 3 gals./sq. (varies by system)
- Brush, Roll or Spray
- Do not install below temp. of 42° F – substrate temp. below 120° F
- Limited Material Warranty for up to 10 Years
- Guarantees available for up to 20 Years
MP-300 RUST INHIBITING PRIMER Light Blue TCRMC
- 5 gal. & 55 gal. drum
- Pressure wash then apply to rusted areas before applying TOPCOAT® Flashing Grade or Elastomeric Membrane – 1 gal./sq.
- Brush or Spray
- Limited Material Warranty for up to 10 Years
- Guarantees available for up to 20 Years
LIQUID FLASHING FABRIC GRADE 5 Gal. TCLFFG
- 5 gal.
- Use to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric
- Brush or Spray
TOPCOAT® FASTENER GRADE
- 1 Qt. Cartridge – approx. 275 fasteners/cartridge
- Use to encapsulate exposed metal roof fasteners also sealing around curbs and counter flashings
- Flexible will expand & contract with metal roof
TOPESTER FABRIC 6” X 150’ TCTEF
- Widths – 4”, 6”, 12” & 36” all by 150’
- Polyester woven fabric to be used with TOPCOAT Flashing Grade, SB-900 & Flexseal at all penetrations joints or other areas subject to high shear & stress
TOPCOAT®® EPDM COATING
- 5 gal. & 55 gal. drum – Coverage 1 gal./sq.
- Use to resurface EPDM membrane roofs
- Roll or Spray
- Must use with TOPCOAT® EPDM CLEANER 1 gal. – coverage 1 gal./500 sq. ft. –drying time 30 minutes
