DESCRIPTION:
RPI Royal Edge Reinforced EPDM membrane is a cured EPDM single-ply roofing membrane that incorporates an internally inserted 9 X 9, 1,000 denier polyester weft reinforcing scrim. It can be used in Mechanically Attached, Fully Adhered, and Ballasted Systems. Available in .045 mil and .060 mil gauge.
APPLICATION INSTRUCTIONS:
1. All substrates must be dry, clean, and free of debris and loose foreign materials including oils, grease, and other contaminants.
All surfaces must be smooth and free of sharp and protruding edges.
2. All voids greater than ¼ inch should be filled with an acceptable material. 3. RPI Royal Edge Reinforced EPDM membrane must be installed according to RPI
S ystem Specifications.
PRECAUTION:
1. When moving/transporting, avoid dragging rolls. Do not allow membrane to come into contact with objects that can puncture, cut, or tear the membrane.
2. Prevent contact with products such as oils, animal fats, petroleum products, and
grease .
3. Refer to Material Safety Data Sheets (MSDS) for safety information and disposal
RECOMMENDED STORAGE:
1. Protect membrane from puncture and other physical damage.
2.
Before stocking/loading rooftop, check existing structure to ensure dead load
limitations are not exceeded. Consultation with a structural engineer is
recommended.
3.
Do not store material near ignition or open flame sources. Material will burn when exposed to open flame.
RPI
