With Falcon Foam Tapered EPS Insulation, you can cost effectively insulate any roof where water drainage is a primary concern. Use it on single-ply membrane roofs – loose – laid ballasted, fully-adhered or mechanically-fastened – or with a cover board and built-up roofing (BUR) systems where it makes an ideal substrate for asphalt and bitumen. The light weight of Falcon Foam tapered roof insulation makes it easy to hoist, handle and install for labor-saving economy. It can be applied in either single or multiple layers to meet your particular requirements – and you can cut it quickly and easily with common job site tools.
Eliminate ponding water concerns with one – or all of our 4 tapered EPS products.
Tapered EPS Insulation
- Our top-of-the-line flat EPS sheets.
- HCFC-Free and always available
Tapered With Fiberboard
- EPS with a fiberboard laminate for mechanically fastened or fully-adhered membrane systems.
Tapered With Perlite
- EPS with a Perlite finish offers superior protection and sustainability.
Tapered With Kraft-Back Foil
- EPS backed with foil for an effective vapor barrier and outstanding thermal resistance.
NAILABLE ROOF INSULATIONS:
ACFoam® CrossVent™
- Patented ACFoam CrossVent insulation consists of a thermally efficient polyiso insulation board with 1.0″, 1.5″ or 2.0″ vent spacer strips separating 7/16 in.
- APA/TECO rated OSB from the polyiso foam insulation to create a cross ventilating airspace.
- CrossVent combines the desirable benefits of a nailable surface and insulation with the addition of a cross ventilating airspace.
- CrossVent is made to order in 4´ x 8´ (1220mm x 2440mm) size panels and in nominal thicknesses of 2.5″ to 6.5
ACFoam® Nail Base
- ACFoam Nail Base Insulation is a thermally efficient polyiso insulation board bonded to 7/16″ APA/TECO rated OSB on the top side and with a glass fiber reinforced felt facer on the bottom.
- ACFoam Nail Base Insulation provides the desirable benefits of both a nailable surface and insulation making installation an easy one-step labor saving process.
- This product is made to order in 4´ x 8´ (1220mm x 2440mm) panels and in nominal thicknesses of 1.5″ to 4.5″.
FIRE RETARDANT SLIP SHEETS: FR-10 and FR-50
Fr-10 and FR-50 are roof system components manufactured of fire-retardant, coated-glass fiber mats used to enhance the overall fire performance of a roof system
- FR-10 is coated on one side
- FR-50 is coated on both sides to improve fire performance in a single layer.
